Where's the price?

This product may be a discontinued item, but more importantly, make sure you are logged in with your trade account!
resi-linx.com is a trade only website. You can sign up and apply for trade membership to get access to pricing and the ability to add to cart. Alternatively, seek out your local resi-linx dealer for purchase enquiries.

RL-BT100 is no longer available - please refer to RL-BT600 for replacement.



  • 50 Watt RMS per channel Class D Amplifier with built-in Bluetooth Receiver and High Gain Bluetooth Antenna
  • Play and control your music wirelessly in single or multiple zones
  • Affordable solution
  • 1:1 connectivity ensuring stable connection, minimising dropouts
  • Works with iPod Touch (2nd generation), iPhone, iPad and other Bluetooth enabled audio transmitters
  • Optional analogue line level input via UTP and Figure 8 connection to global source RL-BT430 Input Module
  • Up to 25m range*
  • Personalise label (via PC) to easily identify each zone for pairing with BT device
  • TIM module (surface mounted) enables IR control of local amplifier functions and shows pairing and power status (TIM included). Can also provide IR control of source connected to the RL-BT430 via RLIR700/800 emitters.
  • Expand via UTP connection to another RL-BT100. System distributes either global input or audio received via Bluetooth. Refer linx-Audio Bluetooth Installation Diagram under “support” page. Please note that master unit must be ‘ON’ (can be muted) for the slave/s RL-BT100 to receive audio signal from RL-BT430.
  • Power locally (P/S) or remote via UTP & Figure 8 connection to RL-BT430 Input Module
  • Supplied with 240V 3.75 Amp power supply, TIM module (2.7m cable) and remote control


* The communication range quoted is calculated based on an unobstructed line of sight test under optimum conditions. Actual range will vary depending on conditions, and is often less than the maximum possible. Your actual range will be limited by several factors including, but not limited to, electromagnetic interference and obstructions.

  • Length:  198mm
  • Width:  119mm
  • Height:  48mm
  • Weight:  630g
  • Audio Output:  50W RMS per channel
  • Input Frequency:  2.4GHz
  • Bluetooth® compatibility:  A2DP Bluetooth enabled devices
  • Bluetooth® System:  Bluetooth 2.1 + EDR/Class 1
  • Range:  Up to 25m (The communication range quoted is calculated based on an unobstructed line of sight test under optimum conditions.)
  • Line Level Audio Input Connector:  RJ45 from RL-BT430
  • Power Requirement:  24V 3.75 Amp DC input
  • Amplifier Type:  Class D
  • Expandable:  Up to 3 zones
  • Frequency response:  200 Hz - 15KHz